Download Resetter Printer HP Deskjet D1360

Download Resetter Printer HP Deskjet D1360

Download Resetter Printer HP Deskjet D1360
Download Resetter Printer HP Deskjet D1360– The entire HP Printer Brands any type no resetter software. It’s just the same Catdridge and sensors are dirty.
enough you clean it with a tissue when the sensor is dirty, if Catdridge new means must replace the original. Be careful in filling Catdridge HP printers because it could leak and wet motherboard your printer, if the ink is leaking everywhere, there is a good idea to disassemble and clean up first in the printer. because of the possibility of wet by ink printer board

Here are step by step what I did to overcome blinking hp d1360

  1. Loose advance its power cord and USB cable to the computer
  2. Then look at the back of the printer there are three holes that reads + 15V, + 32V central hole which is grounded, so your task of short holes + 15V, + 32V with a central hole / ground. with tweezers or any principal conductor with the aim reflash / prog reset the printer.
  3. Then enter the power cable, turn cobah .what still blingking
  4. If still blinking try to turn off the printer and then press the power button
  5. Try to loose cartridges and clean all the lines in the cartridge and the printer socket biaasnya part in it dirty with ink
  6. After that turn off and turn on the printer again, gimna? blingking still ouch! we cobah the other way.
  7. Loosecartidge all, Put that black cartidge, If the blingkin’ve not mean that Collor cartige rusek !!
  8. To color cartidge No. 22 how to reset it, try to cover with insulating / masking tape on the track red. then input to the printer lid and turn off the life. then you loose the red masking tape, then die and turn on the printer.
  9. If the path has not been able to try to close the blue color in a way no 8
  10. Progressive persist, now I try to close all lanes with tape but there are some who do not ketutup
  11. May be

Download Resetter Printer HP Deskjet D1360

Previous post:

Next post: